Service Items

For the production and research enterprises, how should their products meet the regulatory requirements of the target market, how should they meet the standard requirements based on, how should they test, we can get professional answers and guidance。In addition to holding relevant symposia and seminars regularly, we can also provide one-to-one consultation and answer services according to the requirements of enterprises。

According to the Standardization Law of the People's Republic of China，"The products produced by enterprises have no national standards and industry standards，Enterprise standards shall be formulated，As a basis for organizing production"，"Existing national standards or industry standards，The State encourages enterprises to formulate enterprise standards that are stricter than national standards or industry standards，Use within the enterprise"。At present, a large number of export products in China are directly equivalent to using international standards or higher than domestic standards for production, but have not been revised to become enterprise standards。Our company provides consulting services to assist enterprises to revise enterprise standards, develop enterprise standards for their products that meet the relevant provisions and record the standards, so as to avoid huge losses caused by non-standard production when the products appear on the market 。

What does iso22000 certification mean?ISO22000:2005 Food Safety Management System ISO22000:2005 Food Safety Management System。With the development of economic globalization and the improvement of social civilization, people pay more and more attention to food safety.Require organizations that produce, operate and supply food to demonstrate their ability to control food safety hazards and those factors that affect food safety。Customer expectations, social responsibility, so that food production, operation and supply organizations gradually realize that there should be standards to guide the operation, security, evaluation of food safety management, this call for standards, promote the ISO22000:2005 food safety management system requirements of the standard。The benefits of applying for food safety management system certification: 1, can carry out organized and targeted communication with trading partners。 2. Optimize the utilization of resources within the organization and in the food chain。 3. Improve literature resource management。 4. Strengthen planning and reduce post-process inspection。 5, more effective dynamic food safety risk control of food。 6. All control measures will be subject to risk analysis。7. Systematic management of necessary programs。 8. Because of the focus on the end result, the standard is widely applicable。 9, can be used as an effective basis for decision-making。 10. Continuously and stably provide final products that meet the requirements of food safety to meet the requirements of customers。 11, more effective dynamic safety risk control of food。 12. Save resources by reducing redundant system audits。 How much does ISO22000 certification cost? The first thing you need to know about ISO22000 certification is the conditions you need to meet to apply for certification and the related application costs。At present, the consulting and certification costs of ISO22000 add up to between 12,000 and 16,000 in the first year, and the annual supervision and audit costs after that are about 6000-8000, according to the actual production line number and product complexity of the enterprise。These are the relevant knowledge about CE certification and what standard is shared by orange, I believe you have a basic understanding of this. Regarding professional questions, if you have any questions, you can contact the professionals below to answer them. I hope to help you。Contact us: Lanya Technology Services (Shenzhen) Co., Ltd. is the national CNAS, China Metrology Certification CMA, American Laboratory Accreditation Association A2LA, Wireless Charging Alliance WPC, Bluetooth Certification Evaluation Committee SIG, Amazon and other international institutions accredited laboratory。Lanya's mission: Make your products reach the world!Consulting contact: Benson Zhang Mobile phone /Mob:(+86)13632500972 E-mail: sales13@jhcm123.com Add: Building C, Hongjingda Industrial Park, No. 107 North Ring Road, Shiyan Street, Baoan District, Shenzhen Lanya test more than service!

Recently, many clients have come to inquire about this kind of question。It seems that we do not know much about the handling steps and charging standards of EU ROHS testing and certification。It doesn't matter, today Xiaobo will summarize the six steps of EU ROHS testing and certification, and the charging standard。What is the EU ROHS environmental certification，It is mainly for the detection of environmental protection of product materials，Test material for lead, cadmium, mercury, hexavalent chromium，Polybrominated biphenyls，Tests to see if the content of polybrominated diphenyl ethers exceeds the standard，ROHS test product is any object except air liquid can do this test，ROHS is a mandatory certification in the European Union，Therefore, the export of products to the EU countries must do this test，The detection method of ROHS is now mainly a single group of raw material detection，Complete machine inspection，Also finished product integration certification，The three tests are different，The cost is also different，Applicants can be based on their own customer requirements，Or recommended by the certification body，To select the detection method.The analysis principle of the ROHS detector is the same as that of the X-ray fluorescence spectrometer, and the ROHS detector can be regarded as an X-ray fluorescence spectrometer。It can be used to determine various forms of random composition of up to 83 elements in the periodic table。Its main components are X-ray tube, crystal, secondary collimator and detector, and auxiliary devices such as primary filter。For the control, the customer asks the supplier to fully comply with the corresponding standard testing methods, equipped with complete sets of equipment, the establishment of a laboratory is unlikely, but an XRF equipment detector factory can still afford, so most of the XRF equipment detector as a hard condition。Does product RoHS testing have to be done once a year？The standard of RoHS testing is likely to be updated once, in the process of constantly improving the standard of RoHS testing, the new standard, so long the test report will expire, so there is no time limit, and the cycle of redoing will be updated in accordance with the European Union standard!RoHS2.0 Test item 2011/65/EC to RoHS10 lead (Pb)，Cadmium (Cd)，Mercury (Hg)，Chromium (Cr6+)，Polybrominated biphenyls (PBBs) and polybrominated diphenyl ethers (PBDEs)，Di-n-butyl phthalate (DBP)，N-butyl benzyl phthalate (BBP)，(2-hexyl) hexyl phthalate (DEHP)，Hexabromocyclododecane (HBCDD)。If there is no clear requirement to do ROHS ten items, the general default is non-metallic material or ROHS6 items。The general European RoHS 2011/65/EU requires six items to be tested, and the directive comes into effect as the ROHS Directive。Non-metallic materials part of the RoHS test items are lead (Pb), cadmium (Cd), mercury (Hg), hexvalent chromium (Cr6+), polybrominated biphenyls (PBBs) and polybrominated diphenyl ethers (PBDEs) a total of 6 items。Metal material part of the ROHS test items are lead (Pb), cadmium (Cd), mercury (Hg), hexavalent chromium (Cr6+) a total of four。These are the relevant knowledge about CE certification and what standard is shared by orange, I believe you have a basic understanding of this. Regarding professional questions, if you have any questions, you can contact the professionals below to answer them. I hope to help you。Contact us: Lanya Technology Services (Shenzhen) Co., Ltd. is the national CNAS, China Metrology Certification CMA, American Laboratory Accreditation Association A2LA, Wireless Charging Alliance WPC, Bluetooth Certification Evaluation Committee SIG, Amazon and other international institutions accredited laboratory。Lanya's mission: Make your products reach the world!Consulting contact: Benson Zhang Mobile /Mob:(+86)1363250097...

What is WEEE registration？Many people habitually call WEEE certification, which is actually wrong。WEEE: WasteElectricalandElectronicEquipment (WEEE), namely, broken electrical and electronic equipment recycling instructions。While recovering valuable resources, in order to properly deal with such a large scale of electronic and electrical waste, the EU implemented two directives in 2002 that have a significant impact on electronic and electrical equipment goods, namely WEEE(EU Recycling Directive) and RoHS (EU Environmental Directive).。In 2016, the relevant German environmental protection authorities announced laws and regulations specifically for e-commerce, and the relevant provisions are that amazon informs overseas e-commerce businesses selling on its platform to register for electronic equipment recycling, and before obtaining the WEEE electronic equipment recycling code, amazon must order merchants to suspend sales。Therefore, many people always think that WEEE registration is the relevant provisions of Germany, in fact, all European and American countries have relevant provisions, but Germany is mandatory。WEEE Registration testing and certification agency WEEE registration introduction: At present, amazon implements a new policy of compulsory closure for companies selling cross-border e-commerce, and no registered WEEE registration code will be forced to remove goods from the shelves。In all European and American countries, Germany has the most stringent regulations on environmental protection, so German WEEE must be done!1. What are the WEEE certified goods？Taking the German station as an example, WEEE registration is mainly for one type of goods。According to official information，The WEEE Directive applies to 10 categories of electrical and electronic goods: large household appliances;Small household appliances;IT and communication equipment;Consumer electronics and electrical equipment;Lighting equipment;Electronic and electrical tools (except large fixed industrial tools);Toys, leisure and sports facilities;Medical instruments;Testing and controlling instruments;Vending machines。2. Which countries are required for WEEE certification？Germany, United Kingdom, France, Italy, Spain, Sweden, Netherlands, Denmark, Portugal, Poland, Belgium, Finland, Luxembourg, Austria, Ireland, etc。At present, amazon has implemented a new policy of compulsory closure for companies selling cross-border e-commerce, and goods will be forced to be removed if they do not register the WEEE registration code。Among all European and American countries, Germany has the most stringent regulations on ecological and environmental protection, so German WEEE must be done!WEEE applies for registration as follows: 1.The merchant fills in the German recycling registration application form;2.Recycling company to draw up recycling contracts;3.Merchant signature and countersignature;4.The recovery company shall sign the agreement and the contract shall take effect;5.The merchant receives the bill and makes payment;6.The recycling company shall provide the contract and the registration information of the merchant to the EAR for verification;7.After EAR verification, WEEE code is issued and entered into the German electronic recycling computer query system。8.If there is a six-month suspension of system updates in the system software, the EAR will lock your product list and require you to register again。These are the relevant knowledge about CE certification and what standard is shared by orange, I believe you have a basic understanding of this. Regarding professional questions, if you have any questions, you can contact the professionals below to answer them. I hope to help you。Contact us: Lanya Technology Services (Shenzhen) Co., Ltd. is the national CNAS, China Metrology Certification CMA, American Laboratory Accreditation Association A2LA, Wireless Charging Alliance WPC, Bluetooth Certification Evaluation Committee SIG, Amazon and other international institutions accredited laboratory。Lanya's mission: Make your products reach the world!Consulting contact: Benson Zhang Mobile /Mob:(+86)136325009...

Degradation product inspection Main inspection items: degradation performance, degradation rate, degradation capacity, degradation capacity, compost performance, degradation rate, degradation rate, degradation rate;Biodegradability Laboratory degradable materials testing Reference standard: GB/T20197 Definition, classification, marking and biodegradability requirements of degradable plastics GB/T19277.1(ISO14855-1) Determination of the final aerobic biodecomposition and disintegration capacity of materials under controlled composting standards using the method of determining released carbon dioxide Part I General method GB/T18006.2 Degradation test of disposable degradable food and beverage containers GB/T2461-1999 Degradable polyethylene plastic for packaging GB/T19275-2003 Potential biodegradation test of materials under specific microorganisms EN13432 Packaging。Evaluation of the recyclability of packaging by synthesis and biodegradation Test method for aerobic biodegradation of plastic materials under the ASTMD5338 composting standard GB/T22047 Determination of the final aerobic biodegradation capacity of plastic materials in soil - Modified by the ASTMD5510 method for determination of the amount required in a closed absorption meter or determination of released carbon dioxideITI Test (Rapid Biodegradation performance)OECD301C Operating Standard for Thermal aging degraded plastics ASTMD5511 Method for determining the anaerobic biodegradation capacity of plastic products under high solid-state anaerobic digestion standards ASTMD6954 Test requirements for oxidation and biodegradation of plastic products under environmental standards GB/T18006.1 Plastic products disposable tableware general technical requirements。HJ/T202 environmental marking product Technical requirements Disposable tableware degradable plastic film for QB/T2461 packaging materials: QB/T2670 degradable plastic sheet definition, classification, marking and degradation performance requirements。QB/T2671 Biodegradable plastic products sheet definition, labeling and biodegradable performance requirements。QB/T2672 compostable plastic products sheet definition, marking and compostable performance requirements GB/T15818-2006(JISK3363-1990) surfactant biodegradation test methods GB/T21803-2008 Rapid biodegradability of chemicals DOC reduction test GB/T20778-2006 Water treatmentBiodegradability evaluation method CO2 generation Method。Method A: Fungus test put the sample into a non-nutritive medium (no carbon source) containing a mixture of fungal spores, the fungus can only grow and reproduce by consuming the carbon source in the sample, if the fungus can not grow and reproduce, it indicates that the sample is not easy to be decomposed by the fungus。2 Method B: Bacterial test Put the sample in a non-nutritive medium containing bacteria without carbon source) culture, bacteria can only grow and reproduce by consuming the carbon source in the sample, if the bacteria can not grow and reproduce, it indicates that the sample is not easy to be disintegrated by fungi。3 Method C: Soil burial method The sample is completely buried in the natural soil, and has a certain water retention capacity and a certain humidity, to simulate the state of the material under natural conditions when it is always in contact with the soil with high humidity, such as the state at the bottom of the landfill。These are the relevant knowledge about CE certification and what standard is shared by orange, I believe you have a basic understanding of this. Regarding professional questions, if you have any questions, you can contact the professionals below to answer them. I hope to help you。Contact us: Lanya Technology Services (Shenzhen) Co., Ltd. is the national CNAS, China Metrology Certification CMA, American Laboratory Accreditation Association A2LA, Wireless Charging Alliance WPC, Bluetooth Certification Evaluation Committee SIG, Amazon Amaz...

How to apply for conversion power cord plug quality test report？Conversion power cord plug quality test report application agency looking for？The application for the quality inspection report is applied for by the third-party inspection agency with the testing laboratory and inspection qualification certificate in China。Poor quality of sockets, plugs and converters is a key cause of fire。The product quality problems of small sockets and plugs and converters will have a serious impact on the safety of many customers and their funds。Therefore, customers should mainly consider the safety factor of the product when purchasing sockets and plugs, converters, and switches。The plug converter means that some power cord plugs are converted into another power cord plug (such as telephone power cord plugs, USB charging power cord plugs, power cord plugs on computers, general is the role of mutual exchange of power cord plugs in various countries).。Because the use is common and it is very easy to lead to safety problems, it is necessary to apply for the inspection report of the safety factor before leaving the factory。Procedure: 1, consult customer service, confirm the inspection items and the role of the report, as well as the cost and cycle time。2, fill in the inspection application form, the relevant staff can provide PDF。3. Arrange samples (2-3 samples for testing), send the samples that must be tested by express delivery, arrange testing, and the testing department of the testing laboratory and the reporting department arrange personnel to carry out testing。4, report confirmation, first show the draft report to confirm, the information is correct after informing the customer service report, send the report, the paper version of the report is sent to the customer by Courier, PDF report is sent by mail, mobile phone QQ and other online communication methods。5, quality test report application cycle time 5-7 days, you can apply for expedited (50% expedited fee) plug converter application for inspection report standard specification: Gb/T2099.1, IEC60884-1 household and similar uses socket plugs Part 1: General requirements Gb/T2099.3, IEC60884-2-5 Household and similar uses sockets and plugs Part 2-5: Special requirements for converters standard specification plug converters rating, identification, protection from electric shock, structure, electrical performance, mechanical properties and other technical standards，Suitable for AC current, plug converters with and without protected doors, with and without fuses。Plug converter application for quality test report item: 1.Inspection of marks and dimensions;2.Protection against electric shock, grounding measures;3.The structure of the terminal and the end and the fixed socket;4.Power cord plug and mobile socket structure, interlock socket;5.Aging resistance, protection provided by the housing and moisture resistance;6.Insulation resistance and electrical strength, grounding contact work;7.Temperature rise, breaking capacity, normal operation method, force required to unplug the power cord;8.Flexible cable and connection, mechanical strength, heat resistance;9.Screws, current-carrying parts and connections;10.Creepage distance, electrical clearance and distance through the sealant;11.Insulation layer material resistance to abnormal heat, fire resistance and resistance to electrical marking;12.Additional tests on rust resistance, latch with insulating sheath。These are the relevant knowledge about CE certification and what standard is shared by orange, I believe you have a basic understanding of this. Regarding professional questions, if you have any questions, you can contact the professionals below to answer them. I hope to help you。Contact us: Lanya Technology Services (Shenzhen) Co., Ltd. is the national CNAS, China Metrology Certification CMA, American Laboratory Accreditation Association A2LA, Wireless Charging Alliance WPC, Bluetooth Certification Evaluation Committee SIG, Amazon and other international institutions of accreditation...

LVD's CE system is similar to EMC console commands, and all products in the application area must have the CE mark, and there must be a certificate of compliance signed by the manufacturer's representative or importer。For the sole reason that goods are declared safe (" safe "is defined as the absence of human or livestock death and property damage), LVD claims need to be supported by technical documentation。CE test authority certification: CE certified bottom voltage LVD console command is applicable to all motor products using voltage region 50~1000V AC 50~1000V DC 75~1500V DC power supply，This definition relates to the application domain of the console command，Rather than the application domain of the console commands (e.g，Computers using AC 230V，LVD's DC 12V power circuit is also determined by the risk of LVD)。CE certified LVD console commands apply to goods intended for consumer and industrial use and, in the case of industrial-specific equipment, to goods used by the manufacturer itself (e.g. inspection equipment).。Implement CE certification LVD console command related information: 1.General description of machinery and equipment;2.Design and manufacturing concept drawings;3.Grasp the description and explanation required for these diagrams;4.List all or part of the applicable standards and indicate what countermeasures have been adopted to achieve the idea of console command security;5.Design calculation results and check the implementation process;6.Inspection report。Bottom pressure LVD console command detection criteria:CE certification for household appliances (EN60335) CE certification for lighting commodities (EN60598) CE certification for audio and video commodities (EN60065) CE certification for data commodities (EN60950) CE certification for electrical machinery (EN60204) CE Certification standard for measuring instruments (EN61010) CE bottom pressure LVD console command processingProcess: 1. Description of electrical equipment;2, design principle and parts, circuit diagram;Description and explanation necessary for understanding the above drawings and operation of electrical equipment;4.A list of fully or partially applicable standards, and a description of the failure to adopt standards that meet the security requirements of this console command;5. Calculation and inspection results made during the design;6. Inspection report。LVD is a console command under the CE certification, CE certification in addition to LVD console commands, there are more than 20 other console commands, more applications are EMC, ERP, ROHS and so on。If a product is marked with the CE mark, it means that the product has met the relevant requirements。CE certification actually consists of LVD console commands。Some products only involve LVD console commands and only need to handle LVD console commands, and some products handle many console commands under CE certification。These are the relevant knowledge about CE certification and what standard is shared by orange, I believe you have a basic understanding of this. Regarding professional questions, if you have any questions, you can contact the professionals below to answer them. I hope to help you。Contact us: Lanya Technology Services (Shenzhen) Co., Ltd. is the national CNAS, China Metrology Certification CMA, American Laboratory Accreditation Association A2LA, Wireless Charging Alliance WPC, Bluetooth Certification Evaluation Committee SIG, Amazon and other international institutions accredited laboratory。Lanya's mission: Make your products reach the world!Consulting contact: Benson Zhang Mobile phone /Mob:(+86)13632500972 E-mail: sales13@cblueasia.Add: North Ring Road, Shiyan Street, Baoan District, Shenzhen...

China National Accreditation Service for Conformity Assessment (CNAS) and Bluetooth Technology Alliance (SIG) officially signed the "Bluetooth Technology Review Cooperation Agreement", becoming the third accreditation body in the world to sign this agreement。This provides great convenience for our laboratory to apply for SIG authorized laboratory。In the future, as long as our laboratory passes the CNAS Bluetooth technology review and is recognized by the CNAS laboratory, it can meet the requirements of applying for SIG Bluetooth laboratory qualification authorization。Bluetooth is a very popular wireless communication technology。The Bluetooth Technology Alliance was founded in 1998 by Ericsson in collaboration with IBM, Intel, Nokia and Toshiba to develop the Bluetooth standard and license the Bluetooth technology and trademark to manufacturers。Manufacturers must first become SIG members before using Bluetooth technology。Products designed and manufactured by members must be tested by SIG authorized laboratories before they can be marketed under the "Bluetooth" trademark。By the end of 2018, the number of SIG members had reached 3.5万家。Since there are many manufacturers of Bluetooth products, in order to ensure the interconnection between Bluetooth products of various manufacturers, SIG stipulates strict product testing and certification procedures。Testing laboratory qualification authorization has become an important link。SIG initially authorized laboratories by self-organizing and reviewing them。In March 2018, SIG issued a new laboratory authorization procedure, requiring that authorized laboratories must be accredited through ISO/IEC17025, and that accredited institutions should sign a multilateral mutual recognition agreement for laboratory accreditation in the International Laboratory Accreditation Cooperation (ILAC) and sign a cooperation agreement with SIG。As of June 2019, SIG has a total of 51 authorized laboratories worldwide。There are also a large number of LABS interested in applying。After the release of the new laboratory authorization procedure in March 2018, Chinese laboratories were once forced to seek accreditation from overseas accreditation bodies in order to obtain SIG authorization。In the cooperation agreement, CNAS and SIG agree on the training of Bluetooth technology reviewers, the content and process of technical review, the acceptance of CNAS review results, trademark licensing, the use and disclosure of confidential information, and other responsibilities and obligations to be borne by both parties。The signing of the cooperation agreement will save a lot of human and material costs for our laboratory to apply for SIG Bluetooth laboratory qualification, facilitate domestic enterprises to obtain convenient testing services, and promote the development of related trade。Lanya Technology Services (Shenzhen) Co., Ltd. is the national CNAS, China Metrology Certification CMA, American Laboratory Accreditation Association A2LA, Wireless Charging Alliance WPC, Bluetooth Certification Evaluation Committee SIG, Amazon and other international institutions accredited laboratory。Lanya's mission: Make your products reach the world!Consulting contact: Benson Zhang Mobile phone /Mob:(+86)13632500972 E-mail: sales13@jhcm123.com Add: Building C, Hongjingda Industrial Park, No. 107 North Ring Road, Shiyan Street, Baoan District, Shenzhen Lanya test more than service! 优势项目 无线充Qi 蓝牙BQB 苹果MFiUSB-PD快充 中国SRRC认证项目大中华China 质检报告 CCC CQC CTA SRRC BSMI NCC OFCA亚洲Asia METI TELECP...

The Wi-Fi Alliance (full name: International Wi-Fi Alliance Organization), Wi-Fi Alliance (WFA), is a business alliance that owns the Wi-Fi trademark。It is responsible for Wi-Fi certification and trademark licensing, headquartered in Austin, Texas, USA.。　　Founded in 1999, its main purpose is to promote the compatibility certification of Wi-Fi products worldwide and develop IEEE802.11 Standard wireless LAN technology。The alliance has more than 200 member units, 42% of which are from the Asia-Pacific region, and there are also five members in China。　　In 1999, to promote IEEE 802.The development of the 11b specification formed the Wireless Ethernet Compatibility Alliance (WECA).。　　In October 2002, the name was changed to Wi-Fi Alliance.。　　In 2013, the Wi-Fi Alliance announced that it would merge with the Wireless Gigabit Alliance (WiGig) to bring the latter's technology under its umbrella。The merger is expected to close in mid-2013, after planning and due diligence have been completed。Wi-fi Alliance Certification Related Introduction Wi-Fi in the context of wireless LAN refers to "wireless compatibility certification"，It is essentially a business certification，It is also a wireless networking technology，It used to be connected to a computer through a network cable，Wireless router，Then the effective range of the radio wave coverage of this wireless router can be connected by WIFI connection，If the wireless router is connected to an ADSL line or other Internet connection line，It's also called a "hot spot."。　　A growing non-profit international organization of more than 300 member companies with 10 independent testing laboratories in 6 countries。　　As the industry and technology in the field of WLAN, to provide testing certification for the world。　　Maintain good cooperative relations with the whole industry chain, and the members cover manufacturers, standardization bodies, regulatory units, service providers and operators。　　Wi-Fi CERTIFIED to achieve WLAN technology interoperability, provide 朂 user experience;More than 3,000 products have been certified。　　In 1999, several members of the Wi-Fi industry joined forces to create a global non-profit organization to promote the adoption of a universal standard for high-speed wireless LAN。The name of the organization is the Wi-Fi Alliance。　　Since the continued expansion of Wi-Fi networks is based on numerous businesses, homes, and public hotspots that provide people with wireless Internet access anywhere, anytime, compatibility is critical。The Wi-Fi Alliance sets global standards and follows them through rigorous testing of wireless devices and Wi-Fi certification。　　The scale of the commercial application of Wi-Fi is a rare successful precedent in the world。The problem is concentrated in two aspects: first, the large operators do not recognize this model; second, the lack of effective business models。However, wireless local area networks based on Wi-Fi technology have become increasingly popular。This will mean very convenient applications in the future。　　Once Wi-Fi networks exist in public places, and the problems of interconnection, high charges, and roaming for operators are solved, Wi-Fi will transform from a successful technology into a successful business in the future。 Many operators have entered this field, and many governments and cities are using this technology to build wireless countries and cities。And with the popularity of digital entertainment devices...

Lanya is a professional IMEI number application organization. Now we will briefly introduce the composition, meaning, charging standard, information required for application and application process of IMEI number。IMEI International Mobile Equipment Identity (IMEI) is an abbreviation of the International Mobile Equipment Identification Code。Commonly known as "mobile phone string number", "mobile phone string code", "mobile phone serial number", used to identify each independent mobile phone in the GSM mobile network, equivalent to the ID number of the mobile phone。IMEI code is applicable to GSM and WCDMA mobile phones and mobile data terminals, while CDMA mobile phones use MEID code, which is different from IMEI code。Every GSM mobile phone sold through formal channels in the world has a unique IMEI code。The IMEI code is uniformly planned by the GSMA Association and authorized to be distributed by regional organizations, in China by the Telecommunications Terminal Testing Technology Association (TAF) of the Ministry of Industry and Information Technology, and other distribution agencies include BABT in the UK, CTIA in the United States, and MSAI in India (the Mobile Communication Standards Alliance of India)。IMEI Toll Telecom Terminal Testing Technology Association (TAF) since 2008 as the Global System for Mobile Communications Association (GSMA) China mobile terminal type Assignment code (TAC) audit body, adhere to the free issuance of TAC for enterprises in China。During this period, international TAC allocations have been paid by the GSMA。In recent years, the GSMA has continuously called for TAC approval work to be in accordance with global unified standards and the principle of equal competition within the industry, and finally formed the following fee scheme, which will be officially implemented from January 1, 2016。1. TAC price: 400 USD/piece;2, if the number of TACs purchased in a year exceeds 30, you can choose to pay a one-time payment of $12,000 in the next year to obtain the same number of TACs as in the previous year。More than 10 units will be charged $3,000;3, TAC purchase fee limit: 30,000 USD/year;4, GSMA members and associate members enjoy a 10% discount on the above basis。IMEI(International Mobile Equipment Identity) is an abbreviation of the international mobile Equipment Identity Code，The IMEI code is unique，On the logo on the back of the phone，And read and write in the memory of the phone (press "*#06#" to obtain)。It is also the "file" and "ID number" of the phone in the manufacturer.。The IMEI consists of 15 digits，Use only digits from 0 to 9 for each digit，TAC model Allocation Code (8-bit) SNR serial number (6-bit) CD verification code (1-bit) NNXXXXYYZZZZZZA1 and IMEI codes are encoded in the following formats: NNXXXXYYZZZZZZ A2 and TAC (Type Allocation Code) codesThe first two "NN" bits of TAC are the IMEI Reporting Body Identifier，For example, 01 is the United States CTIA，35 for British BABT，86 for Chinese TAF,91 for India。The six digits "XXXXYY" after TAC are the mobile terminal model identification code defined by the approval authority。3, the composition and meaning of serial number: IMEI 9-14 digits "ZZZZZZ" is the product serial number, representing "000000-999999" a total of 1 million numbers。4, the meaning of the Check code (Check Digit), from the first 14 digits through the Luhn algorithm to calculate the check code。Note: Only in some products...

The process of 3C certification is as follows: the enterprise submits the application - "Data review -" sample test - "factory inspection -" conformity assessment - "and issues the certificate。For factories that are not familiar with the process, we still recommend that the third-party testing and certification agency Yibo entrust the application。The third-party entrusting institutions are familiar with the CQC audit process, have a high degree of cooperation, and have convenient communication channels, which can guide the standardization of factory inspection and ensure the smooth passage of factory inspection。In the specific implementation of the 3C certification application, it is necessary to meet the hardware part, including the production site, equipment and instruments, personnel and organizations to meet the requirements;It is also necessary to ensure that the software part, including the quality assurance system, procedure documents, control procedures, inspection procedures, management systems, operating procedures, etc. comply with the standard。3C certification to ensure that the ability to meet the validity of the certification: (1) the basis of the factory inspection: factory capacity inspection requirements, the national standard based on the certification product, the type test report of the certification product, the certification implementation rules;(2) Several conclusions of the factory inspection: the factory inspection passed, the factory has documented nonconformities, and the factory has serious nonconformities，On-site verification is required, and there are serious non-conformance items in the factory，Factory inspection fails;(3) Enterprises applying for certification for the first time，The certification agency shall receive the report of qualified product test results submitted by the testing agency，A factory inspection notice will be issued to the applicant，At the same time to the certification agency factory inspection team issued factory inspection task letter;(4) The inspectors shall conduct on-site inspections of the applicant enterprises according to the requirements of the Quality Assurance Capability of the Product Certification Factory，Some samples were taken to verify the consistency of the test results.(5) After factory inspection，The inspection team shall issue the factory inspection report in the prescribed reporting format，Submit to a certification agency for review and assessment;(6) The report submission time after the factory review is generally 5 working days，Complete site audit with auditors，Count from the date of receipt of the nonconforming corrective action report submitted by the manufacturer。Enterprises can apply for 3C certification themselves, or they can entrust 3C agencies to apply。Generally, small factories lack special personnel responsible for factory system and certification qualification management, and are not familiar with the 3C certification process, which is too troublesome to do by themselves, and it may be time-consuming and laborious to apply for it by themselves, and it is not necessarily approved after tossing。Lanya Technology Services (Shenzhen) Co., Ltd. is the national CNAS, China Metrology Certification CMA, American Laboratory Accreditation Association A2LA, Wireless Charging Alliance WPC, Bluetooth Certification Evaluation Committee SIG, Amazon and other international institutions accredited laboratory。Lanya's mission: Make your products reach the world!Consulting contact: Benson Zhang Mobile phone /Mob:(+86)13632500972 E-mail: sales13@jhcm123.com Add: Building C, Hongjingda Industrial Park, No. 107 North Ring Road, Shiyan Street, Baoan District, Shenzhen Lanya test more than service! 优势项目 无线充Qi 蓝牙BQB 苹果MFiUSB-PD快充 中国SRRC认证项目大中华China 质检报告 CCC CQC CTA SRRC BSMI NCC OFCA亚洲Asia METI TELECPSE JATE VCCI KCBLS SASO|IECEE 欧洲EU CE RoHS REACH EN71 PA...

ISO17025 is a laboratory management standard developed by the International Organization for Standardization ISO/CASCO (International Organization for Standardization/Committee for Conformity Assessment), the predecessor of the standard is ISO/IEC Guide 25:1990 "Requirements for the Competence of Calibration and testing laboratories".。The international organization for the management of laboratory accreditation is the "International Laboratory Accreditation Cooperation Organization (ILAC)", which is attended by 44 laboratory accreditation bodies, including the China National Accreditation Committee for Laboratories (CNACL)。The ISO17025 standard mainly includes: definition, organization and management, quality system, audit and review, personnel, facilities and environment, equipment and standard substances, quantitative traceability and calibration, calibration and testing methods, sample management, records, certificates and reports, calibration or testing subcontracting, external assistance and supply, complaints and other content。The core content of the standard is equipment and standard substances, quantity traceability and calibration, calibration and detection methods, sample management, which focuses on evaluating whether the laboratory calibration or detection capability meets the expected requirements。Chinese National Laboratory Accreditation Committee (CNAS) is our country's only laboratory accreditation body, assumes all laboratory ISO17025 standards accreditation。All calibration and testing laboratories can adopt and implement ISO17025 standards, in accordance with international practice, all the data provided by ISO17025 standards laboratories have legal effects and are internationally recognized。At present, more than one thousand laboratories in China have passed the ISO17025 standard certification, and through the implementation of the standard, the accuracy of the experimental data and results has been improved, and the visibility of the laboratory has been expanded, thus greatly improving the economic and social benefits。The state requires voluntariness: the laboratory applies voluntarily according to its own development and needs。A, the need for the development of trade B, the need for the development of quality certification C, the need for notarization activities D, the need for government management, the principle of legal status non-discrimination, laboratories from all walks of life。Have the effect of international mutual recognition。The implementation subject is the sole agency of China National Accreditation Service for Conformity Assessment (CNAS)。Fees for any type of laboratory 1 Approved fees are:Application fee (charge when applying for initial review, re-review, extension review, etc.), review fee (charge when the applicant conducts document review, on-site review (including on-site witness of initial review, re-review, supervision review, extension review, corrective action verification review, etc.), review and registration fee (charge when initial review, re-review, extension review, etc.), annuity and cost。The relevant accreditation fee standards for laboratories and inspection institutions in Hong Kong, Macao, Taiwan and abroad shall be negotiated by both parties and agreed in the contract in accordance with international practice。CNAS shall determine the number of man-days required for the evaluation according to the scale and scope of the evaluation of the applicant or the approved laboratory and inspection institution, in order to ensure the quality of the evaluation work。3 The travel, accommodation and accommodation expenses of the assessor shall be borne by the applicant or the accredited institution。CNAS-ISO/IEC17025 certification process preparation - system establishment and operation - (at least 6 months) - ability verification satisfaction - Application - on-site review - certification of CNAS-ISO/IEC17025 Role and significance 1, indicating that the laboratory has the technical ability to carry out calibration/testing in accordance with relevant international standards。CNAS laboratory accreditation standards are based on ISO/IEC17025, which is an international standard for laboratory quality and technical requirements。The laboratory has been recognized by CNAS, marking that it has established a set of quality management system in accordance with international standards, as long as the work is carried out in strict accordance with the system, the technical ability of the laboratory is guaranteed, then the laboratory provides testing/calibration services for customers...

With the expansion of the scale of manufacturers, the demand for testing is large, and more and more self-built laboratories are built。Lanya can provide the overall solution including equipment procurement, laboratory planning。Undertake packaging service。Business background The unreasonable layout of the laboratory will cause cross-contamination of the laboratory, inaccurate test results, inconvenient personnel operation and other results, resulting in a waste of manpower and material resources, failure to pass the laboratory approval, and finally the risk of demolition and re-doing。Service content Lanya laboratory according to the actual situation of the customer laboratory，The experimental project is carried out in combination，Customized design for customers: laboratory layout plan, laboratory furniture layout, equipment layout diagram, laboratory decoration design, laboratory water supply and drainage design, laboratory HVAC design (exhaust, tail gas treatment, clean air conditioning), laboratory centralized gas supply design, laboratory sewage system design, laboratory electrical design, etc。Huatang laboratory will be arranged according to the actual test project requirements of the laboratory, and fully consider the convenience, safety and scalability of laboratory work。In addition, Huatang Laboratory will also assist customers in the design of the laboratory for long-term and comprehensive planning, avoid the future transformation of the laboratory, as far as possible to achieve professional standards, safe and reliable, comfortable and beautiful。Shenzhen Huatang Technology Service Co., Ltd. is a holding subsidiary of Huatang Testing and Certification Group Co., LTD. (Stock code: 300012) ，The Laboratory Design department has 100 engineers specializing in laboratory graphic design, BIM design, 3D design and construction design，Design before construction，Ensure that the laboratory complies with the relevant laws and regulations as well as the individual needs of customers。Lanya Technology Services (Shenzhen) Co., Ltd. is the national CNAS, China Metrology Certification CMA, American Laboratory Accreditation Association A2LA, Wireless Charging Alliance WPC, Bluetooth Certification Evaluation Committee SIG, Amazon and other international institutions accredited laboratory。Lanya's mission: Make your products reach the world!Consulting contact: Benson Zhang Mobile phone /Mob:(+86)13632500972 E-mail: sales13@jhcm123.com Add: Building C, Hongjingda Industrial Park, No. 107 North Ring Road, Shiyan Street, Baoan District, Shenzhen Lanya test more than service! 优势项目 无线充Qi 蓝牙BQB 苹果MFiUSB-PD快充 中国SRRC认证项目大中华China 质检报告 CCC CQC CTA SRRC BSMI NCC OFCA亚洲Asia METI TELECPSE JATE VCCI KCBLS SASO|IECEE 欧洲EU CE RoHS REACH EN71 PAHS GS WEEE ERP美国Americas FCC IC Rro65 CEC DOE ETL\UL CSA NOM其他Othericas CB UN38.3 IEC62133 EN50332 RCM MEPS SAA Automotive Electronics Auto-...

The testing work is meticulous and highly professional, and not all manufacturers have professional engineers to control and manage。What certifications are necessary;How to determine whether the certification requirements and standards are correct;How can planning save time and money when there are too many models to be certified？Lanya provides certification planning and coordination services, and undertakes the overall outsourcing services of the company's certification。Tests are written at will，No plan，There are no rules，This leads to the following problems: The test case design is not in place，undercoverage，Or it's not efficient enough to compress automated testing time because of schedule reasons，Automated testing exists in name only. The automation infrastructure is inadequate，Some tests are expensive to write and lack perfect test data support，The problems that make the test so much less effective，In fact, to sum up, the essence is one reason，Lack of overall planning for automated testing，Automated testing is not integrated into the development system。Overall planning of automated testing to solve these problems，Get the most out of automated testing，Liberate the productive forces，Improve R&D efficiency，Free us from repeated manual testing，The first thing we need to do is to plan for automated testing，Take automated testing up a notch，Let each person realize his value and significance，Inclusive product，研发，Testing and top management。The overall planning of automated testing should be top-down, composed of multiple levels to form a complete system, this system should include framework, data, use cases and code four parts, each part has its own responsibilities, the four cooperate with each other to form a complete test system and closed loop。The following is a brief introduction to this system。The test framework here refers to the general test framework, can also be called the test infrastructure, its purpose is to serve the test related personnel, so that they are more efficient and convenient to write tests, perform tests, so as to improve efficiency。It may involve the following work: Build a test framework，A relevant test developer is required (this position is not necessary)，But need this role) to proceed，A good and perfect testing framework，The automatic test of test data, which is directly related to the final test experience and effect test system, cannot be separated from the support of data，For the test to run smoothly，We need to prepare one or more sets of test data，In order to use in different scenarios。At the same time, this data should not be disorganized, it should be orderly, and can cover as many use scenarios as possible, and needs to be iteratively maintained as the business evolves。If the user has multiple states, each state corresponds to different user behaviors, the test data of these users should contain users in different states at the same time, in order to test whether the user's behavior in different states meets the expectations, of course, this is only a very simple example, the actual scenario will be much more complicated。The test cases of the test system are supported by the test framework and test data，We need to start designing test cases，The design of test cases is ideally independent of the development process，In this way, we can focus more on the design of test cases，For teams with manual testing，Test cases also need to be considered in both automated and manual testing，In order to design the most efficient test cases，Balance test effectiveness with cost。The test code of the test system has the previous planning and preparation, the writing of the test code should be a natural thing, and the developer can write the corresponding test code。Of course, at this stage, if you encounter difficulties in writing test code, such as a certain basic data is difficult to reproduce in the test, you may need to return to the test framework, and in turn improve the ability of the test framework to form a complete closed loop。Lanya Technical Services (Shenzhen) Co., Ltd. is the national CNAS, China Metrology Certification CMA, American Laboratory Accreditation Association A2LA...

National requirements are changing, technology is evolving rapidly, and standards are iterating。Lanya does training services according to the relevant content that customers need to know。Help enterprises to understand the norms in a timely manner, and product compliance is smooth around the world。Technical training service refers to a sales service that enterprises, according to the requirements of users, in order to ensure that users can effectively operate, use and maintain the purchased machinery and equipment products, and replace users to train relevant technical personnel。The technical training service is suitable for providing services to users who purchase the enterprise's machinery and equipment products，It enables users to master the operation, use and maintenance technology of the enterprise's products，Ensure that the products purchased by customers can be used efficiently，To motivate and induce users to buy the products of the company;meanwhile，It can also make the enterprise establish a good reputation among users，Thus conducive to the creation of new market opportunities，Expand the sales of enterprise products。The content mainly includes 1, training technical operators for users to ensure that users can master the operation and use of machine equipment products。2, for the user to train machine equipment product maintenance personnel, to ensure that users in the use of machine equipment products, once the fault can be repaired by themselves。3. Train machine and equipment product management personnel for users, so that users can master the management knowledge and methods of machine and equipment products, and constantly improve the use efficiency of machine and equipment products。Form Enterprises to provide users with technical training services, can take the form of: 1, internal training method。Technical training courses are held within the enterprise, and personnel sent by users are sent to the enterprise for training and learning。2. Field practice method。The user sends technical personnel to the enterprise work site to follow the class, and the enterprise designates a special person to be responsible for coaching and guidance。3. Out training method。At the request of the user, the enterprise sends professional and technical personnel to the user manufacturer, and carries out technical training for the personnel of the user manufacturer in the form of technical training courses, technical lectures or on-site explanation and guidance。The requirements mainly include: 1, the technical training services provided by the enterprise for the user must be suitable for the actual needs of the user, which is conducive to the user to quickly grasp the technical knowledge of the operation, maintenance, warranty and management of the enterprise's products。2, enterprises should select high technical level, experienced technical personnel, responsible for providing technical training services for users, and constantly improve the quality and effect of technical training。3, the enterprise is conducting technical training services for users，We should be good at combining theory with practice，Combine classroom teaching with practical guidance，Focus on helping users solve various technical problems，To ensure that users can skillfully master the application of knowledge and practical technology in the operation, repair, maintenance and management of machine equipment products，Give full play to the effectiveness and role of the purchased products。Lanya Technology Services (Shenzhen) Co., Ltd. is the national CNAS, China Metrology Certification CMA, American Laboratory Accreditation Association A2LA, Wireless Charging Alliance WPC, Bluetooth Certification Evaluation Committee SIG, Amazon and other international institutions accredited laboratory。Lanya's mission: Make your products reach the world!Consulting contact: Benson Zhang Mobile phone /Mob:(+86)13632500972 E-mail: sales13@jhcm123.com Add: Building C, Hongjingda Industrial Park, No. 107 North Ring Road, Shiyan Street, Baoan District, Shenzhen Lanya test more than service! 优势项目 无线充Qi 蓝牙BQB 苹果MFiUSB-PD快充 中国SRRC认证项目大中华China 质检报告 CCC CQC CTA SRRC B...